Fast commissioning and infinite possibilities, make this Drive perfect for machines. The CFW500 covers power levels from 0.18 to 7.5 kW (0.25 to 10 HP).
Characteristics
- Output current 1.0 to 56.0 A (0.25 to 30.0 cv / 0.18 to 22.0 kW);
- Single and three-phase power supply 200-240 V, 380-480 V or 500-600 V;
- Scalar (V/F), VVW Vector, Sensorless Vector and Vector with Encoder;
- Selectable plug-in module;
- Plug and play philosophy;
- Built-in Operating and Programming Interface (HMI);
- Built-in RS485 port (in any plug-in module selected);
- Pump Genius: dedicated functions for the pump drive;
- SoftPLC - built-in PLC functionalities;
- Side by side installation (for temperatures below 40 ºC);
- Operating ambient temperature 50 ºC;
- Surface or DIN rail mounting;
- Brake IGBT (available on frame sizes B and C);
- 3C2 or 3C3 protection class for application in environments with corrosive chemical substances;
- IP20 protection degree (standard) and NEMA1 (optional);
- Fan with fast exchange system;
- Internal RFI filter (optional);
- Fault or alarm diagnosis;
- Fieldbus communications (according to plug-in module selected) CANopen, DeviceNet, Profibus-DP or Ethernet;
- USB communication port (CFW500-CUSB plug-in);
- Memory card for data transfers (parameters and SoftPLC) without the necessity to power up the CFW500 (CFW500-MMF accessory);
- Free WLP and WPS available on Softwares;
- Remote serial operating interface (HMI) (CFW500-HMIR accessory)
|
|
|
Simplified Programming and Operation
- View, setting and command of all parameters
- Up to three parameters indication on the display, according to user selection
- Oriented start-up and grouped parameters
|
Flexibility and Performance
The CFW500 has a modern design, and it can be selected according to the application requirements, providing flexibility with excellent performance. In the plug-in module version, the CFW500-IOS module comes with the VSD. In the version without plug-in module, the desired plug-in module may be selected (always one plug-in module per VSD). All plug-in modules have built-in RS485 Modbus-RTU.
The installation of the CFW500 is simple, and its configuration and operation is intuitive with the navigation menus of the operating interface (HMI) with built-in LCD display. Using the flash memory module, it is possible to download the existing setting from one CFW500 to other units without powering them up.
|
|
|
Connectivity
The CFW500 can be connected to the main fast industrial Fieldbus communication networks, with protocols used worldwide such as CANopen, Profibus-DP, EtherNet/IP, Modbus-TCP, PROFINET IO and DeviceNet, according to the plug-in module selected. In addition, all plug-in modules come with serial interface RS485 Modbus-RTU built-in.
|
Features
- Password to protect the parameters J Special engineering units (RPM, ºC, Nm, mA, %, kW, kWh, among others)
- Backup of all parameters (via WPS software, memory card or memory of the CFW500)
- Possibility to save up to two different settings on the memory of the CFW500
- Setting of the switching frequency according to the application requirements
- Speed reference via electronic potentiometer
- Multispeed with up to eight programmable speeds
- Slip compensation
- Manual or automatic torque boost (V/F scalar mode) or self-adjustment (VVW vector mode)
- Acceleration/deceleration ramps
- “S” type ramp
- DC braking
- Internal dynamic braking (frame size B and biggers)
- PID controller to control processes in closed loop
- Flying start / Ride-through
- Sleep mode
- Skip frequencies or frequency ranges function
- Overload and overtemperature protection
- Overcurrent protection
- DC link voltage supervision
- Fault log
|
|
|
Applications
- Extruders
- Conveyor belts
- Roller tabl
- Fans / Exhausters
- Centrifugal pumps
- Granulators / Palletizers
- Dryers and rotary ovens
- Process dosing pumps
- Stirrers / Mixers
- Rotary filters
- Winding machines / Uncoiling machines
|